May 24th, 2016
Preparing Your Deck
Before you bring out your furniture, give the deck a good sweeping. Make sure you remove leaves and other debris from between the deck boards. Then, take a few minutes to inspect the deck.
Make sure the deck components are structurally sound. Railings should be firm and not wobbly. There should not be any give in the decking when you walk across it.
Drive in any nails or screws that have popped above the surface. If the fastener won’t hold in its original position, drive in a new fastener nearby.
Inspect the deck’s framing if possible. Pay attention to intersections, such as where joists meet beams. Use a screwdriver or an awl to poke any suspect area. If the tool sinks into the wood easily, the wood could be rotting.
Examine where the deck attaches to the house. The point of attachment is called the ledger board, which should be installed with through bolts or lag screws designed for ledger attachment – not simply nailed – to the framing of the house. There should also be flashing that diverts water from the ledger.
If you do find problems, especially on supports or where the deck connects to the house, call in a professional to get them fixed right away.
If the deck has been well maintained, simply hosing it off may be all the cleaning it needs. But if a more thorough cleaning is needed, use a product that is recommended for the material of the deck. For composite materials, use a cleaner recommended by the manufacturer.
You should always follow the directions on the label of the cleaner, but here are some general guidelines:
If the deck boards are beyond repair or you just want to upgrade the look of the deck, consider removing the decking and railings and installing new material over the old framing. Chances are the framing is made of pressure-treated lumber, no matter what the decking material. Most of the framing is covered and installed vertically so water can’t puddle on it. If it is in sound shape, it can serve as the foundation for any new decking material.
Freshen Up Your Furniture
As with decks, outdoor furniture can use a little maintenance after a long winter – even if you stored the furniture indoors.
Check all fasteners and tighten any that are loose.
Revive finishes if necessary and remove any rust from metal furniture. Use a primer that prevents rust before touching up the piece with paint. Give wood furniture a fresh stain or coat of paint.
Clean the furniture as recommended by the manufacturer. In general, it’s safe to wash everything using a mild soap and water. Don’t use any cleaner containing chlorine or an abrasive material unless the manufacturer says it won’t harm the furniture. Use a wood-safe product like Murphy’s Oil Soap to clean up wood furniture.
Protect the furniture depending on its material. Apply a thin coat of automobile wax to aluminum furniture to keep out moisture. An exterior varnish will protect wood from the damaging ultraviolet rays of the sun, and it will expand and contract with the wood to prevent cracking of the finish. Help prevent fabric cushions from fading by applying an outdoor fabric protector.
Outdoor parties usually mean sunscreen – which in turn means sunscreen spills. And if you have a pool or spa, there will be wet bathing suits laden with chlorine and other chemicals left out to dry. To keep furniture looking good all summer, clean up any spills or damp spots as soon as they happen. Give the furniture a rinse with clean water and allow cushions to dry thoroughly. Outdoor slipcovers will also help prolong the life of your furniture. Use them throughout the season during periods when the furniture is not in use so you’ll be ready when summer rolls around again.
Written by Realty Times Staff